This underground rail car transfer point for Sub-Bituminous Coal was…
Read More >STANDARD DOUBLE CLAMP-MOUNT® CONVEYOR SKIRTBOARD SEALING SYSTEM
Increase Conveyor Performance – by helping to eliminate spillage and dust in the loading zone.
Reduce Conveyor Downtime – by the simple clamp adjustment and release to allow repositioning or changing out skirting in minutes verses hours, without tools.
Rugged Construction – of our 9” (225mm) high by 24” (600mm) long clamp provide effective locking ability for any type of skirting material.
Alternative Clamps – include a stainless steel, a mine-duty, a low-profile 6” (150mm), and an economical single clamp.
Also available in Stainless Steel
STOPS SPILLAGE AND DUST
ASGCO®’s skirting system is designed for ease of installation, adjustment and flexibility in skirting choices. By utilising a clamp mount (attached to the outside of the conveyor skirt board), the skirting system holds the skirting material in place, contacting the belt to form a seal.
Installs Easily – and allows for one person to replace or reposition skirt rubber.
System Can Accommodate – system can accommodate 20°, 35° and 45° idlers.
Alternative Clamp Finish – stainless steel
Product Specifications
Replacement Parts – Replacement Keeper includes Stud & Pivot For quality sealing results – use Clamp-Mount on a vertical chute wall with 1” ORG compound. For superior sealing, combine Clamp Mount with ASGCO ’s Support Plate and either ORG (¾” or ½” thick) or 6” or 8” Tri-Seal or Multi-Seal . Weight – 7.85 LbsPart Numbers
Red-Enamel (Double Handle) Clamp-Mount® System
Pricing is done per linear ft.
| Part Number | Skirting Type Sealing Compound | Thickness | Width | Weight lbs |
|---|---|---|---|---|
| ADS-ORG-2546-BC-2 | Dura-Seal ORG Compound | 1" | 6" | 6.22 |
| ADS-ORG-2548-BC-2 | Dura-Seal ORG Compound | 1" | 8" | 7.06 |
| ADS-ORG-1906-BC-2 | Dura-Seal ORG Compound | 3/4" | 6" | 5.69 |
| ADS-ORG-1908-BC-2 | Dura-Seal ORG Compound | 3/4" | 8" | 6.31 |
| ADS-ORG-1276-BC-2 | Dura-Seal ORG Compound | 1/2" | 6" | 5.13 |
| ADS-ORG-1278-BC-2 | Dura-Seal ORG Compound | 1/2" | 8" | 5.54 |
| ADS-B&R-2546-BC-2 | Dura-Seal ORG Compound | 1" | 6" | 6.3 |
| ADS-B&R-2548-BC-2 | Dura-Seal ORG Compound | 1" | 8" | 7.16 |
| ADS-F&O-2546-BC-2 | Dura-Seal Flame & Oil Resistant (35 Durometer) | 1" | 6" | 6.22 |
| ADS-F&O-2548-BC-2 | Dura-Seal Flame & Oil Resistant (35 Durometer) | 1" | 8" | |
| ADS-F&O-1906-BC-2 | Dura-Seal Flame & Oil Resistant (35 Durometer) | 3/4" | 8" | |
| ADS-F&O-1908-BC-2 | Dura-Seal Flame & Oil Resistant (35 Durometer) | 3/4" | 8" | |
| ATS-TRI-2546-SC-2 | TRI-SEAL 60 DURO | 1" | 6" | |
| ATS-TRI-2548-SC-2 | TRI-SEAL 60 DURO | 1" | 8" | |
| AMS-MTI-2228-SC-2 | Multi-Seal 55 Duro | 7/8" | 8" | |
| AMS-MTI-2228-SC-2-EP | Multi-Seal EPDM (400) | 7/8" | 8" |
Literature Downloads
Solutions Case Studies
